|
|
 |
| |
| Wrap Around Labeler - CVC 300: |
|
|
| |
Standard Product Separator Wheel is recommended for normal product shapes and labeling speeds.
Product Separating Screw (optional) is recommended for higher labeling speeds (more than 80 pieces per minute), for small bottles and/or for labeling a single product only.
|
|
SelfSet ™
FOUR KEY POINTS FOR A SUCCESSFUL LABELER!!
The Four Most Common Labler Problems Are:
(1) Incorrect operator set-up
(2) unreliable electronic controls
(3) label wrinkles and
(4) poor labeling accuracy.
CVC SelfSet™ labeling machinery provides the following unique features to eliminate these problems.
1. CVC SelfSet™ - No Operator Adjus™ent is required for the Product Sensor or Label Sensor. The CVC SelfSet™ labeling system provides the optimum sensing position for every label length and container length or diameter, eliminating the need for moving the product sensor or label sensor. Other labeling machines consume much time and require expert adjus™ent when changing labels or containers.
2. Only CVC's SelfSet™ Control System Synchronizes Speed for ALL moving parts. Whenthe first product passes the product sensor, theCVC SelfSet™ microprocessor will scan and identify the product length or diameter and label length. The labeling position, dispensing speed and label protrusion position are set and synchronized. It takes only three seconds to complete the procedure. This is very beneficial when changing bottle and label size. Only one pass through of a new container allows the system to quickly "read" the bottle and set up speeds for all motors. Product labeling speed may be immediately increased or decreased at a single touch.
3. Automatic Adjusent™ of Label Sensor Prevents Wrinkles and Misfeeds. The SelfSet™ labeling system automatically calculates the optimum sensitivity and label placement without moving the label sensor! NO more short feeds, wrinkles or multiple label feeds because of improper sensitivity settings!
4. Easy Job Memory for Immediate Setup of all Moving Parts. Save up to 50 jobs into memory locations and recall them at the push of a button. If it is a new job, just run SelfSet™, then save it! |
| |
|
|
|
